2019 TECHNOLOGY

TOURING TECHNOLOGY

The technology of our 2019 boards was improved to provide the best performance and more durability. Our boards are designed and shaped with a high-end technology with perfectly balanced weight, strength and impact resistant characteristics. Our latest TOURING technology combines pre-coated EPS foam, a fiberglass layer and PMI foam as a deck reinforcement, a first full wrap 6OZ fiberglass layer, followed by a full wrap bamboo layer and a second full wrap 4OZ fiberglass layer, as well as a high performance gloss finish paint. 

We also added a smooth comfort deck pad grip, as well as a tail kick pad to each one of our 2019 Touring TUPAIA models. 

PRE COATED EPS FOAM

Our boards are shaped out of high density EPS foam and built from custom designed materials. The technology delivers a high energy resulting in ultimate speed and drive. The pre coated EPS Foam is high density EPS - expanded polystyrene foam – and has a high strength to weight ratio and good compression stability.

We then add a 4 oz fibreglass layer on the deck, as well as a layer of PMI Foam as a deck reinforcement.

FIBERGLASS LAYERS 

We use 4OZ fiberglass under the PMI foam to give more strength on the boards standing area, so the rider can use all this surface during the paddling without damaging the board on the long term. The fiberglass layers act as a skeleton in the board construction. We add a first full wrap 6OZ fiberglass layer on the whole board to maximise the TOURING board strength, as well as a full wrap 4OZ fiberglass layer (after bamboo layer) as a finition and add more toughness and durability to our TOURING board. 

PMI FOAM (DECK & PLUGS REINFORCEMENT) 

We use PMI foam material in our technology and construction to reinforce specific part of our hard boards. Added to the fiberglass layer, we use the PMI foam on the rider standing area as a deck reinforcement, and we also use it to reinforce the fin box and alls plugs (Go Pro plug, GPS Plug, leash plug, etc.) . Thanks to its fined cell size, the PMI foam ensures the minimum possible uptake resin, it provides as well an outstanding mechanical strength.

BAMBOO LAYER

On top of the first fiberglass layer, we use a full wrap bamboo layer on the entire board. We choose to use Bamboo layer in our TOURING board construction because of all its intrinsic quality. The bamboo, as a building material, is a natural composite material with a high strength-to-weight ratio, which is useful for our board structures. It is also a great sustainable material (non-polluting, natural and renewable resource)

LOGOS & HIGH PERFORMANCE GLOSS FINISH PAINT

We then add our In Lams water transfert logo onto our boards, and we cover the entire board with a high performance gloss finish paint, which result into a higher speed and better penetration and glide in the water. 

DECK PAD AND TAIL KICK PAD

Our new 425pro innovation SUP Deck pads are providing and awesome grip, and are making your hard board look fantastic with this modern design. Super soft under your feet with great grip texture, absorbing weight and shocks and reducing foot fatigue, especially in longer distance. 

These new thick pads look like fish bones, with cut out lines. These deck pads are only 3mm with a snake aspect on the surface.

The 425pro innovation tail kick pad provides a better grip and great comfort.